Description
Aspire Cleito Pro Tank: a 24mm sub-ohm tank for direct-lung (DTL) vaping on any 510 mod that can push 60W or more, at the current price on this page. The UK version holds 2ml, it fills from the top, and it runs the Aspire Cleito Pro coils plus the older Cleito and Cleito EXO coils. This is the Cleito Pro, not the Cleito 120 Pro, a bigger tank with its own coils. Best for cloud chasers who already own a mod; not for anyone wanting a tight mouth-to-lung draw.
Aspire Cleito Pro Key Facts
The Aspire Cleito Pro Tank holds 2ml in its UK TPD version.
The Aspire Cleito Pro Tank is 24mm wide and screws onto any 510 mod.
The Aspire Cleito Pro Tank uses the 0.5Ω Cleito Pro coil, rated by Aspire at 60 to 80W.
The Aspire Cleito Pro Tank also runs the 0.15Ω Cleito Pro mesh coil and original Cleito coils.
Aspire Cleito Pro: Fits and Does Not Fit
Fits on: any regulated 510 mod with at least 60W, such as the Innokin Kroma 217 mod or the VooPoo Argus GT 2. It sits flush on a 24mm or 25mm mod and overhangs slim pens.
Coils that fit:
Aspire Cleito Pro 0.5Ω Kanthal: 60 to 80W, DTL. Fitted in the box.
Aspire Cleito Pro 0.15Ω mesh: 60 to 75W, DTL. The flavour coil. Sources list 60 to 75W or 70 to 80W, so start at 60W.
Original Aspire Cleito 0.2Ω and 0.4Ω, and Cleito EXO 0.16Ω. Aspire built the Cleito Pro to take them.
Does not fit: Aspire Cleito 120 and Cleito 120 Pro coils (a larger coil head), Nautilus coils, and any pod. Buy spares here: Aspire Cleito Pro coils and Aspire Cleito coils.
Aspire Cleito Pro Specs
Capacity: 2ml (UK). Aspire’s 3ml and 4.2ml glass are not supplied here.
Size: 24mm wide, about 46mm tall without tip. Fits most current mods.
Coils: 0.5Ω (60 to 80W) and 0.15Ω mesh (60 to 75W). Vertical coils that push in from the base.
Fill: top fill. Unscrew the top ring, tilt the tank, fill slowly through the small port.
Airflow: three adjustable bottom slots. Fully open is loud; half open suits most owners.
Colours: Black, Gold, Rainbow, Silver Grey. Wide-bore Aspire drip tip.
Best E-Liquid for the Aspire Cleito Pro
Use a 70/30 shortfill at 3mg or 6mg. Nic salts at 10mg or 20mg are too strong at 60W, and 50/50 liquid floods the wide wick ports. Expect 6 to 8ml a day, so buy 100ml bottles.
How to Set Up the Aspire Cleito Pro
Unscrew the base, pull the old coil out and push the new one in until it clicks.
Drip e-liquid into the cotton ports and the centre of the coil until soaked.
Screw the base on, remove the top ring, tilt and fill slowly, refit the ring.
Fit the tank and wait 10 minutes. The Ecigclick review found hard priming plus a 10-minute wait avoids a burnt first coil.
Set 60W, airflow half open, a few short draws before going higher.
How to Make the Aspire Cleito Pro Last Longer
Never run it below a quarter full: the vertical coil wicks from the bottom and burns on a low tank.
Do not force the plastic drip tip: it screws into metal and cross-threads.
Swap the spare O-rings when the glass starts to weep.
Rinse the tank at each coil change so sweet liquid does not gum the airflow.
Change the coil every 7 to 14 days, sooner on dark or sweet liquids.
Best Aspire Cleito Pro Colours
Black matches almost every black mod and hides marks, so it is the usual pick. Silver Grey suits stainless and gunmetal mods. Rainbow is for collectors with a rainbow mod to match, and Gold pairs with gold or bronze mods.
What’s in the Box
1 x Aspire Cleito Pro Tank (2ml, UK) with a 0.5Ω coil fitted
1 x spare coil (Aspire lists the 0.15Ω mesh; some UK stock ships a second 0.5Ω)
Spare O-rings, user manual
No bubble glass and no mod included
See all Aspire tanks, Aspire coils and vape tanks on VOS.
